How to set up a three-node cluster on a single box¶

This tutorial describes how to set up a 3-node cluster on a single physical box.

For the purposes of this tutorial, assume the following:

The local IP address is 192.168.2.21.
Percona XtraDB Cluster is extracted from binary tarball into /usr/local/Percona-XtraDB-Cluster-8.0.x86_64

To set up the cluster:

Create three MySQL configuration files for the corresponding nodes:

/etc/my.4000.cnf

[mysqld]
port = 4000
socket=/tmp/mysql.4000.sock
datadir=/data/bench/d1
basedir=/usr/local/Percona-XtraDB-Cluster-8.0.x86_64
user=mysql
log_error=error.log
binlog_format=ROW
wsrep_cluster_address='gcomm://192.168.2.21:5030,192.168.2.21:6030'
wsrep_provider=/usr/local/Percona-XtraDB-Cluster-8.0.x86_64/lib/libgalera_smm.so
wsrep_sst_receive_address=192.168.2.21:4020
wsrep_node_incoming_address=192.168.2.21
wsrep_cluster_name=trimethylxanthine
wsrep_provider_options = "gmcast.listen_addr=tcp://192.168.2.21:4030;"
wsrep_sst_method=xtrabackup-v2
wsrep_node_name=node4000
innodb_autoinc_lock_mode=2

/etc/my.5000.cnf

[mysqld]
port = 5000
socket=/tmp/mysql.5000.sock
datadir=/data/bench/d2
basedir=/usr/local/Percona-XtraDB-Cluster-8.0.x86_64
user=mysql
log_error=error.log
binlog_format=ROW
wsrep_cluster_address='gcomm://192.168.2.21:4030,192.168.2.21:6030'
wsrep_provider=/usr/local/Percona-XtraDB-Cluster-8.0.x86_64/lib/libgalera_smm.so
wsrep_sst_receive_address=192.168.2.21:5020
wsrep_node_incoming_address=192.168.2.21

wsrep_cluster_name=trimethylxanthine
wsrep_provider_options = "gmcast.listen_addr=tcp://192.168.2.21:5030;"
wsrep_sst_method=xtrabackup-v2
wsrep_node_name=node5000
innodb_autoinc_lock_mode=2

/etc/my.6000.cnf

[mysqld]
port = 6000
socket=/tmp/mysql.6000.sock
datadir=/data/bench/d3
basedir=/usr/local/Percona-XtraDB-Cluster-8.0.x86_64
user=mysql
log_error=error.log
binlog_format=ROW
wsrep_cluster_address='gcomm://192.168.2.21:4030,192.168.2.21:5030'
wsrep_provider=/usr/local/Percona-XtraDB-Cluster-8.0.x86_64/lib/libgalera_smm.so
wsrep_sst_receive_address=192.168.2.21:6020
wsrep_node_incoming_address=192.168.2.21
wsrep_cluster_name=trimethylxanthine
wsrep_provider_options = "gmcast.listen_addr=tcp://192.168.2.21:6030;"
wsrep_sst_method=xtrabackup-v2
wsrep_node_name=node6000
innodb_autoinc_lock_mode=2

Create three data directories for the nodes:
- /data/bench/d1
- /data/bench/d2
- /data/bench/d3

Start the first node using the following command (from the Percona XtraDB Cluster install directory):

$ bin/mysqld_safe --defaults-file=/etc/my.4000.cnf --wsrep-new-cluster

If the node starts correctly, you should see the following output:

Expected output

111215 19:01:49 [Note] WSREP: Shifting JOINED -> SYNCED (TO: 0)
111215 19:01:49 [Note] WSREP: New cluster view: global state: 4c286ccc-2792-11e1-0800-94bd91e32efa:0, view# 1: Primary, number of nodes: 1, my index: 0, protocol version 1

To check the ports, run the following command:

$ netstat -anp | grep mysqld
tcp        0      0 192.168.2.21:4030           0.0.0.0:*                   LISTEN      21895/mysqld
tcp        0      0 0.0.0.0:4000                0.0.0.0:*                   LISTEN      21895/mysqld

Start the second and third nodes:

bin/mysqld_safe --defaults-file=/etc/my.5000.cnf
bin/mysqld_safe --defaults-file=/etc/my.6000.cnf

If the nodes start and join the cluster successful, you should see the following output:

111215 19:22:26 [Note] WSREP: Shifting JOINER -> JOINED (TO: 2)
111215 19:22:26 [Note] WSREP: Shifting JOINED -> SYNCED (TO: 2)
111215 19:22:26 [Note] WSREP: Synchronized with group, ready for connections

To check the cluster size, run the following command:

$ mysql -h127.0.0.1 -P6000 -e "show global status like 'wsrep_cluster_size';"

Expected output

+--------------------+-------+
| Variable_name      | Value |
+--------------------+-------+
| wsrep_cluster_size | 3     |
+--------------------+-------+

After that you can connect to any node and perform queries, which will be automatically synchronized with other nodes. For example, to create a database on the second node, you can run the following command:

$ mysql -h127.0.0.1 -P5000 -e "CREATE DATABASE hello_peter"

Get expert help¶

If you need assistance, visit the community forum for comprehensive and free database knowledge, or contact our Percona Database Experts for professional support and services.

Community Forum Get a Percona Expert

Last update: 2024-12-10